Our innovative Touchsafe® CP5000 control Panel is set to revolutionise the patient/nurse communication.
With its 15" TFT screen providing information at a glance in a large clear format including: text addresses for call types, locations, resident/patient names, nurse or carer ID, active call list and alarm location with optional floor plan/map.
The status of calls is displayed and additional information can be viewed if required. For example, brief patient medical notes can be called up. Five distinct alarm tones are used for call, assist, emergency, reminder and maintenance to make the system user friendly and simply to operate.
'Reminder' calls can be programed by staff to automatically activate at pre-set intervals for use in the monitoring of nightly checks or to assist with timed medication. Multiple zones can be programmed and named for each panel. The unit has an integral call logger built in automatically recording the history of the events.
There is a power-fail indicator and an internal battery provides around 4 hours back up power. Interfaces are provided for paging, DECT Phones, additional Base Receivers, Mimic panels and Audio Visual Indicators (over door lights). We also make sure Aid Call Touchsafe® systems meet the various safety critical standards required for essential life safety systems because we put safety first. This panel is compatible with the ATX4000 and 5000 product range as well as previous ATX3000 units.
Nurse call systems
Warden call systems
15 inch clear TFT display 120° viewing angle
Text address for call location and resident names
Active call list and staff location list
Mapping/floor plan (optional)
Bespoke screen saver
Mains power failure indication
Distinct alarm tones for call, assist, emergency, reminder and maintenance
Voice annunciation for alarm (optional)
Adjustable volume control and multiple alarm tones
User controls provide varying: Volume; Mute; Call accept; Print; Map; Resident/patient Info; Cursor button to provide basic navigation of menu driven features Mute access is programmable to your specific requirements
User integrated call logging facility
Interface to Aid Call PC call logger application
Interface for multiple paging protocols
Programmable re-page delay 15-600 seconds
Paging programmable by zone
Group codes for: Call, Assistance, Emergency, Night group, Maintenance
Call tone incremented to next level if call remains unanswered for 2 minutes
Multiple zoning capabilities
Multiple common call facility
Multiple night setting facility
Multiple call type which will be displayed on selected zones, e.g. emergency, assistance, call, maintenance, reminder and nurse presence
Indication if a transmitter is not working
Low battery indication for individual transmitters
Hard wired and radio mimic panels may be linked to the system to provide call indication anywhere in the building
Overdoor lights may be connected to the system to provide localised visual call indication, colour coded by call type
BS EN 60950
ETS 301 489-1
RoHS/ WEEE compliant